Hi all below is the status when i run the FLR client on linux.it says created and again removed....the mount point has nothing in it.
From Source: "/SCSI-0:2/"
"test_2"
(0) "Wed Dec 14 17:24:23 2011"
(1) "Thu Dec 15 00:00:01 2011"
"XP-Test"
(2) "Wed Dec 14 23:51:22 2011"
Please input restore point to mount from list above
1
Created "/root/2011-12-15-00.00.01/Mount1"
Created "/root/2011-12-15-00.00.01/Mount2"
Created "/root/2011-12-15-00.00.01/Mount3"
Created "/root/2011-12-15-00.00.01/Mount4"
Created "/root/2011-12-15-00.00.01/Mount5"
Created "/root/2011-12-15-00.00.01/Mount6"
Created "/root/2011-12-15-00.00.01/Mount7"
Created "/root/2011-12-15-00.00.01/Mount8"
Removed "/root/2011-12-15-00.00.01/Mount1"
Removed "/root/2011-12-15-00.00.01/Mount2"
Removed "/root/2011-12-15-00.00.01/Mount3"
Removed "/root/2011-12-15-00.00.01/Mount4"
Removed "/root/2011-12-15-00.00.01/Mount5"
Removed "/root/2011-12-15-00.00.01/Mount6"
Removed "/root/2011-12-15-00.00.01/Mount7"
Removed "/root/2011-12-15-00.00.01/Mount8"
Removed "/root/2011-12-15-00.00.01"
Restore point has been mounted...
"/vCenter/IN-Sys-Eng-DS/host/10.201.224.108/Resources/ssr_test_2"
root mount point -> "/root/2011-12-15-00.00.01"
what am i missing? the windows client is able to mount windows vms and able to restore files.
-Sri Krishna